Freaks

Freaks Unlimited present their professional juggling knives - the 'AirSwords' are highly responsive and visually stunning. This beautifully finished knife is a spectacular performance prop that juggles just like a standard club. Airsword knives have a symmetrical design which allows for side spins and improves the overall balance of the prop. At 275g the weight isn't too far off a traditional club either, making the switch from clubs a little easier. 
The blade itself is made from a top quality stainless steel blade - One of the toughest grades available, and fairly resistant to impacts. They have also been subjected to a heat treatment which makes them have a slight flex but not enough for them to bend. The dowel has also been made from a super-tough beech. The edges of the blade have been ground to look razor sharp on all sides, but they have been carefully blunted for safety. They look like real knives and are therefore much more impressive for performance work compared to other juggling knives. Price is for ONE knife. 

Learn More

Freaks Unlimited present their professional juggling knives - the 'AirSwords' are highly responsive and visually stunning. This beautifully finished knife is a spectacular performance prop that juggles just like a standard club. Airsword knives have a symmetrical design which allows for side spins and improves the overall balance of the prop. At 275g the weight isn't too far off a traditional club either, making the switch from clubs a little easier. 
The blade itself is made from a top quality stainless steel blade - One of the toughest grades available, and fairly resistant to impacts. They have also been subjected to a heat treatment which makes them have a slight flex but not enough for them to bend. The dowel has also been made from a super-tough beech. The edges of the blade have been ground to look razor sharp on all sides, but they have been carefully blunted for safety. They look like real knives and are therefore much more impressive for performance work compared to other juggling knives. Price is for ONE knife. 

Learn More

The Freaks Flourish Stick is completely different to every other metal fire eater stick because there is no exposed metal tube. We have utilised space age technology to keep the neck of the fire eater as cool as possible when touched (e.g. with lips / tongue etc.). Our ‘CoolTouch’ sleeve will withstand naked flames and very high temperatures without ill effect, it is also impervious to fuels (so it won’t act like a wick by soaking up fuel which would otherwise cause problems when fire eating). It also has incredible thermal insulation properties which we have utilised by extending the ‘CoolTouch’ sleeve right under the wick as well as on the neck - this means that the aluminium tube stays surprisingly cool even at the wick end and therefore prevents hot metal burns. And for a finishing touch there is a silicone fuel seal inside the aluminium tube.

The Freaks Flourish Stick has been built using some very advanced materials, including our new ‘CoolTouch’ sleeve technology. The Flourish Stick is constructed around a rugged aluminium tube with lathe turned knurled ends. At one end a tough smooth plastic swinging knob is thermally fixed (with a pull off force in excess of 40kg).

The body of the Freaks Flourish Stick is fully enclosed with our new seamless grip. This is flame retardant and is also a thermal insulator which helps prevent the aluminium tube from getting hot - and therefore allows the Flourish Stick to be handled along most of the entire length of the stick (for ‘Twiddling’). The grip has a lovely ‘feel’ - it’s not slippery and it’s not too grippy either, there are no bumps or ridges, as usually found with wrapped grips, so there’s nothing to interfere with your manipulation. These are a delight to use and the grip is much easier to clean too!

Learn More

The Freaks Dexterity Stick is completely different to every other metal fire eater stick because there is no exposed metal tube. Freaks have utilised space age technology to keep the neck of the fire eater as cool as possible when touched (e.g. with lips / tongue etc.). Their ‘CoolTouch’ sleeve will withstand naked flames and very high temperatures without ill effect, it is also impervious to fuels (so it won’t act like a wick by soaking up fuel which would otherwise cause problems when fire eating). It also has incredible thermal insulation properties which we have utilised by extending the ‘CoolTouch’ sleeve right under the wick as well as on the neck - this means that the aluminium tube stays surprisingly cool even at the wick end and therefore prevents hot metal burns. And for a finishing touch there is a silicone fuel seal inside the aluminium tube.

The Dexterity Flourish Stick has been built using some very advanced materials, including our new ‘CoolTouch’ sleeve technology. The Flourish Stick is constructed around a rugged aluminium tube with lathe turned knurled ends. This version of the Flourish stick has Kevlar at both ends to make it twice as dangerous. 

The body of the Freaks Dexterity Stick is fully enclosed with a new, seamless grip. This is flame retardant and is also a thermal insulator which helps prevent the aluminium tube from getting hot - and therefore allows the Dexterity Stick to be handled along most of the entire length of the stick (for ‘Twiddling’). The grip has a lovely ‘feel’ - it’s not slippery and it’s not too grippy either, there are no bumps or ridges, as usually found with wrapped grips, so there’s nothing to interfere with your manipulation. These are a delight to use and the grip is much easier to clean too!

Learn More

The Freaks signature fire torch is the Firestorm. The backbone of the FireStorm is the new 'RaptorRod', an advanced composite material internal rod made from high strength nylon and glass-fibre and a partial aluminium core. It is extremely strong and durable with micro-flexibility to absorb shocks without bending. It is high temperature rated, resistant to fuels and will not warp.
The neck tube is strong anodised aluminium with attractive colouring, which is easier to clean. With a lathe-turned aluminium insert to strengthen the neck against damage from hard drops. The neck tube also has an internal fuel seal to prevent fuel entering. An aluminium heat shield is used on top of the body as standard. It also has an advanced high temperature synthetic fluoroelastomer washer as a powerful secondary heat shield. This high-tech material is tougher, more durable and has much higher flame and temperature resistance than normal rubber. It is much thicker than usual to offer real protection to the torch body from drops. 63mm wide pure kevlar® wick is used for big long lasting flames. It has a long handle and the balance point nearer to the center for easier catches, faster spins and more control for hand manipulation type tricks. This VINYL version has soft wrapped handles with smart GLITTER vinyl deco. Also features a high density foam knob with a unique nitrile rubber insert to offer better protection to the torch from very hard vertical drops. Learn More