The Spinsterz Pele Fire Wick Attachment - Various Sizes

Fire Hoop Wicks

Our attachable fire hoop wicks are made from all stainless steel
parts, high-performance kevlar wick and only take a few minutes to
attach. They attach to just about any type of tubing up to 1.1" O.D.

The folded wick design allows for maximum burn time without the added
weight of too much wick. This wick design also allows the wick to spin
freely around the cable, thus dramatically increasing the lifespan of
your wicks!

Attaching your wicks is super easy! Just use a quarter, dime, car key, screwdriver, butter knife or something similar. 

YOUR BENEFITS

• Made from rust-resistant stainless steel
• Flexible yet sturdy cable spine design
• Measures 5" long from the hoop to edge of spine
• Wicks sold individually

SIZING INFO

We have a variety of sizes to fit your hoop nice and snug. Please be
sure to accurately measure the OD of your tubing. For instance, 160 PSI
black tubing from Lowes is advertised as 3/4" OD, when in reality it is
approx. 1.1" OD.

• 1.1" OD
• 3/4" OD
• 5/8" OD
• Universal (fits up to 7/8" tubing. When used on smaller diameter
  tubing there will be a slight "tail" that sticks out. Most people either
  don't mind this or they tape it down)

Commonly Asked Questions

WHAT SIZE HOOP DO PELE WICKS FIT?

They attach to just about any type of tubing up to 1.1" O.D. We offer
a variety of sizes to fit your hoop nice and snug. Please be sure to
accurately measure the OD of your tubing. The wicks measure 5" long from
hoop to edge of spine.

WHAT IS THE BURN TIME FOR PELE WICKS?

The wick-burning time really depends on what fuel you are using, the
size of the wick, how quick you are spinning and the age of the wick. 
Typically a wick burn time is 3-4 minutes between refueling.

WHAT ARE PELE WICKS MADE OF?

Our attachable fire hoop wicks are made from all rust-resistant
stainless steel parts, high-performance kevlar wick and only take a
moment to attach to your hoop. The folded wick design allows for maximum
burn time without the added weight of too much wick. This wick design
also allows the wick to spin on the cable, thus dramatically increasing
the lifespan of your wicks!

HOW DO I ATTACH THE WICKS TO MY HOOP?

Just open the hoop up, slide the wicks on the hoop, finalize the
placement and tighten down. It is usually a good idea to give the hoop a
few whirls prior to lighting the wicks to make sure to catch any
issues.